1/2 VALVE AND DETECTOR KIT

ANGLE THERMOSTAT-ADJUSTABLE VALVE AND LOCKSHIELD, WHITE, COPPER CONNECTION 7MULTILAYER 1/2" WITH PRE-SETTING

The valve and lockshield kits are complete with copper connections 12, 14 and multilayer 14 sp2, 16 sp 2.

On each radiator, OLTRE to the air vent valve, a valve and a lockshield must be installed. These components are comparable to regular taps and allow the installer to physically connect the heating body (radiator) to the heating system (pipes). Both serve the function of shutting off the water in the circuit and isolating the radiator from the rest of the system during maintenance situations. The lockshield lacks an adjustment knob. The closure of the return circuit to regulate the flow in the radiators can be done using a tool (hex key/Allen wrench). The valve is equipped with a knob for manual adjustment. It can be used directly and immediately by the user to regulate the water flow and thus the radiator temperature, adjusting it according to the needs of the moment.

The IRSAP valves are Thermostat-Adjustable valves with Pre-setting necessary for the correct balancing of the system. The combination of the thermostat-adjustable valve and the thermostatic head (PURCHASABLE SEPARATELY) allows the radiator to automatically increase and decrease the water flow based on the ambient temperature and the set point set on the thermostatic head. This solution is excellent for autonomously adjusting the ambient temperature, resulting in energy savings. This technology provides access to the tax incentive program for building recovery/renovation.